Em-Pro EMT-7R Power Rotary Machine  

NEW and IMPROVED, EM-PRO EMT-7R Power Rotary/Swaging Machine is, now Easily Retrofittable in the Field from One Configuration to Another. Newly designed electrical panel with a plug-and-play circuit board allows the base machine to be upgraded in the field, all you need is a wrench and a screwdriver to install the upgrades.

(Includes ONE SET – 3/8″ Single Bead Rolls)

– 11″ Throat Depth
– 14 Gauge Mild Steel Beading Capacity
– Based on a standard set or rolls, top speed is 87 RPM which equates to 73.25 surface feet per minute
– Manual Hand Operated Top Shaft Control
– Solid Cast-Iron Frame and Large Oil Bath Gearcase
– Most available options are plug and play and can easily be retrofitted in the field
vShipping Dimensions: 42″ x 35″ x 57″ (Varies depending on options ordered)
– Shipping Weight: Approx. 600 Lbs. (Varies depending on options ordered)
– 1 HP Motor: 110V, 220V 1PH or 3PH, 440V
– Weight: 400 lbs

When choosing a power rotary machine purchase, the following points are crucial to consider in advance of your final decision. Here is a detailed explanation of all pertinent points specifically as they relate to our Em-Pro, EMT-7R:

How it’s built:
The EMT-7R is a solid cast iron machine with an oil bath gearcase. The heavy-duty gearcase allows for a large amount of torque to be output to the drive shafts, from low speed to high speed. The unit is driven by a high efficiency flange mount 1HP motor and variable frequency drive for precise speed control, and all the shafts run in greaseable bronze bushings for an extremely long useable life. If and when the bushings do wear, they are easily changed.At 450 lbs., the EMT-7R is one of heaviest machines on the market today.

Ease of use:
Our Rotary/Swaging machine, according to many current owners, is the “simply the best out there”. The EMT-7R comes standard with hand operated top shaft operation, but many customers are choosing to go with either Pneumatic or Hydraulic systems for safety and productivity. These options allow for essentially hands-free operation, making it easy on the operator, and aids in reducing the possibility of injuries caused from repetitive straining movements

The EMT-7R, depending on the rolls being used, can form as heavy as 14 GA Mild Steel for simple beading operations, and as heavy as 16GA Stainless for our 1/2” Vanstone Flange Rolls. Each set of rolls have their own maximum capacity due to clearances for material thicknesses. The working throat depth is 11”.

Em-Pro EMT-7R