Vicon Machinery
Rollformers
Coil Strip Line Feed
The Vicon line of HVAC Rollforming and Sheet Metal Equipment is the industry proven solution for all of your duct shop needs. Backed by the Vicon name and over 40 years of engineering experience, you can be assured that every Vicon machine is designed and built to provide years of quality service and customer satisfaction. All Vicon machinery is 100% manufactured in the USA in our 50,000 square foot manufacturing facility located in Pevely, MO. Every member of the Vicon team is committed to delivering American made quality equipment and superior customer service to the industry – bearing in mind the necessary components for complete customer success. Innovative technology, impeccable workmanship, and unrivaled support – we pride ourselves as the leader in complete turn-key solutions.
Rollformers
V8 Rollforming Machines
Features & Benefits
– Quietest machine in the industry
– Eight forming stations for all roll sets – no opening roll on any roll set
– Large, heavy duty bearings with inner races and grease fittings protect roll shafts and extend bearing life of the machine
– Slide out shaft design allows for easy maintenance
– Heavy duty 1” diameter stress proof roller shafts
– Woodruff shaft keys for added strength and precise alignment
– 5 HP motor coupled to an industrial oil bath worm gear drive for longevity
– Heavy duty roller chain drive, no belts
– Heavy duty motor starter with thermal protection overloads
V8 Optional Inboard Tooling
– Reinforced flat “S” cleat, 22-28 gauge, 3-3/4” strip
– Drive cleat, 20-28 gauge, 2-1/8” strip
V8 Outboard Optional Tooling
– Female Snaplock 20-30 Gauge, 5/8” Pocket, 1-3/8” Notch
– Male Snaplock 20-30 Gauge, 7/16” Notch
– Small Pittsburgh 20-28 Gauge, 5/16” Pocket, 1” Notch
– Large Pittsburgh 18-24 Gauge, 7/16” Pocket, 1-3/8” Notch
– Large Pittsburgh 16-20 Gauge, 7/16” Pocket, 1-3/8” Notch
– Right Angle Flange 20-28 Gauge 1/4” – 7/16”
– Right Angle Flange 16-24 Gauge 1/4” – 7/16”
– 4-in-1 Rolls (22-28 Gauge 5/8” Tap-In, 5/8” Standing Seam, 9/16” Male Seam, 1/4” Male Pittsburgh
– Acme Lock (Double Seam) 20-28 Gauge
– Acme Lock (Double Seam) 16-22 Gauge
TDX Sixteen Station Rollforming Machine
The Vicon TDX 16 Station Rollformer is tooled to produce the T-25b transverse flange (four-bolt) connection. This profile has been evaluated by the SMACNA Testing and Research Institute and meets testing criteria as called for in SMACNA’s HVAC Duct Construction Standards.
The TDX Rollformer is equipped with one set of TDX tooling mounted left outboard and has one inboard and one outboard roll space available for optional tooling based on shop requirements.
Features & Benefits
– Sixteen (16) Forming Stations for superior quality
– 18 – 26 Ga. Material Capacity – no adjustments necessary between gauges (16 Ga. option available)
– 70 FPM Forming Speed
– Independent adjustment at each forming station with pre-set spring tension
– Large, heavy duty bearings with inner races and grease fittings protect roll shafts and extend bearing life of the machine
– Slide out shaft design allows for easy maintenance
– Heavy duty 1-1/4” diameter stress proof roller shafts
– Woodruff shaft keys for added strength and precise alignment
– Hardened infeed guides reduce wear from plasma cut edge
7.5 HP Motor coupled to industrial oil bath gear reducer for quiet longevity
– Heavy duty roller chain drive, no belts
TDX-II Twelve Station Rollforming Machine
The Vicon TDX-II 12 Station Rollformer is tooled to produce the T-25a transverse flange (four-bolt) connection. This profile has been evaluated by the SMACNA Testing and Research Institute and meets testing criteria as called for in SMACNA’s HVAC Duct Construction Standards.
The TDX-II Rollformer is equipped with one set of TDX-II tooling mounted left outboard standard and has one inboard and one outboard roll space available for optional tooling based on shop requirements.
Features & Benefits
– Twelve (12) Forming Stations
– 18 – 26 Ga. Material Capacity – no adjustments necessary between gauges
– 50 FPM Forming Speed
– Large, heavy duty bearings with inner races and grease fittings protect roll shafts and extend bearing life of the machine
– Slide out shaft design allows for easy maintenance
– Heavy duty 1-1/4” diameter stress proof roller shafts
– Woodruff shaft keys for added strength and precise alignment
– Hardened infeed guides reduce wear from plasma cut edge
– 5 HP Motor coupled to industrial oil bath gear reducer for quiet longevity
– Heavy duty roller chain drive, no belts
Coil Strip Feed Line
The Vicon Coil Strip Feed Line can be configured in several ways for production of various profiles. Coil metal stock is uncoiled, straightened and cut to length either before or after the rollform machine depending on the application. The line is controlled by the Vicon PC Control to ensure accurate finished parts and can be synchronized to the Vicon office program.
The coil cradles and machine guides are configured so that the material to be processed is pre-aligned. This added feature minimizes your set-up time.
Vicon can also manufacture coil strip feed lines to produce single wall turning vanes for elbows.
Features & Benefits
– Dual Drop in style Uncoiler shown. Other types of decoilers available.
– Vicon PC Cut-to-Length Control
– Hydraulically driven three (3) roll straightener with additional entrance and exit pinch rolls
– Hydraulic Press with straight shear or contoured dies
– Hole Punch available
– Hydraulic Power Unit
– Length tolerance of ± 1/16”
– 60” Dual Transfer Conveyor supports blanks during the shearing process and feeds blanks up to 60” long into the rollformer
– Tooling- profile will determine the required rollformer and processing speeds
V8 Pittsburgh Rollformer
V8 Slip & Drive Rollformer
TDX Rollformer
TDX-II Rollformer
Coil Strip Feed Line