Roper Whitney Bending
Manual Slip Rolls
NO. 0381 MANUAL ROLL BENDING MACHINE
The No. 0381 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 42″ with a thickness capacity of 24 gauge mild steel.
381 MANUAL ROLL BENDING MACHINE
The No. 381 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed gear housings and all three rollers are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 36″ with a thickness capacity of 22 gauge mild steel.
NO. 383 MANUAL ROLL BENDING MACHINE
The No. 383 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 24″ with a thickness capacity of 20 gauge mild steel.
NO. 390 MANUAL ROLL BENDING MACHINE
The No. 390 manual roll has 2 1/2″ precision turned and ground high carbon steel rollers. There are four wiring grooves 1/4″, 9/32″, 5/16″ and 3/8″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 36″ with a thickness capacity of 16-18 gauge mild steel.
NO. 392 MANUAL ROLL BENDING MACHINE
The No. 392 manual roll has 2 1/2″ precision turned and ground high carbon steel rollers. There are four wiring grooves 1/4″, 9/32″, 5/16″ and 3/8″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 48″ with a thickness capacity of 20-22 gauge mild steel.
NO. 416 MANUAL ROLL BENDING MACHINE
The No. 416 manual roll has 3″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/8″, 1/2″ and 5/8″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 36″ with a thickness capacity of 14-16 gauge mild steel.
NO. 418 MANUAL ROLL BENDING MACHINE
The No. 418 manual roll has 3″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/8″, 1/2″ and 5/8″. All rolls are standard with fully enclosed gear housings and all three rolls are driven. The upper roll lifts for conventional removal of the work piece. The maximum sheet length is 48″ with a thickness capacity of 16-18 gauge mild steel.
SR-12 12-INCH ROLL
The SR-12 comes with high carbon, precision turned rolls that are ground to high finish. All gears are fully enclosed in housings and the upper roll is lifted with a cam-lever for ample clearance and removal of a full length work piece. Wiring grooves in the bottom and rear rolls are 1/8″ and 1/16″.
NO. 0381
NO. 383
NO. 392
NO. 416
SR-12